Do you want to save money on your heating bills? If so, then you should be looking at ways to make your heating system more efficient. Properly maintained and tuned-up heating systems can reduce the amount of energy needed for a comfortable temperature in a room by as much as 20%. In this blog post, we will discuss 6 tips that will help increase the efficiency of your home’s heating system and help save energy!

#1) Check The Filter

Check the filter on your heating system to ensure that it is clean. If you don’t replace a dirty filter, then airflow will be restricted and this can cause problems with your furnace or boiler as well as increase energy bills. Your HVAC professional can recommend a replacement schedule for filters based upon how often they need cleaning or replacing under normal conditions.

#2) Maintain The Temperature

Keep your thermostat set to a comfortable temperature. If you notice that it is frequently too warm or cool in various parts of your home, then this may be due to areas where there are frequent drafts. These drafts are often caused by problems with ventilation and insulation throughout the house. Have an HVAC professional check your heating system to ensure that it is running efficiently and not wasting energy or blowing out heat.

#3) Ensure Proper Ventilation

Make sure there are no leaks, gaps, or cracks in the house’s weatherstripping around doors and windows. These can cause drafts throughout your home which reduce its efficiency by allowing cold air inside. It is also recommended that your home’s ventilation should be checked to make sure there are no blockages in the return or supply vents.

#4) Do a Duct Check

Make sure all of the air registers throughout the house are open and not blocked by furniture, drapes, etc. If they are closed, then cold air will escape into other rooms instead of heating the room that you are in. Also, all supply and return ducts should be checked for any leaks or gaps which can cause a loss of heated air.

#5) Replace Your Furnace Filters

You should be replacing the filters in your furnace every other month. Sometimes, if you have pets or live in a dusty area this may need to be done more often. If the filter is not replaced regularly then airflow will become restricted and cause problems with heat distribution throughout your home. This can also lead to an increase in energy bills as well since

#6) Increase Insulation

Insulating your home’s walls will help to retain heat inside the house instead of allowing it to escape through them. You may want an HVAC professional to come and check your insulation levels for you as well as assist in implementing any changes that may be needed.

Also, make sure the attic has proper ventilation so cold air doesn’t accumulate there. Attic vents can also help keep moisture from building up inside of your home which is a problem especially during colder months when windows are closed!

Final Words

If you implement all of these tips to increase the efficiency of your heating system, then you should be able to save money on your energy bills and keep a more consistent temperature throughout the house.

Greenstreet HVAC offers professional heating and air conditioning services in Tennessee. Contact us today for more information on how we can help you save money on your energy bills!

You’re looking to buy a heat pump for your home, but you’re not sure which type to get. Do you choose the vertical or horizontal model? What are the benefits of each one? This blog post will answer these questions and more. We’ll start with an overview of what they both do, how they work, and why it matters if you live in a colder climate. Then we’ll look at some popular brands to see who’s got the best vertical vs horizontal models out there. Let’s dive in!

What are heat pumps?

A heat pump is an appliance that transfers thermal energy from one area to another. They are often used for heating and cooling buildings because the process of moving the thermal energy does not require a significant amount of electricity, which can be costly if you’re using it for air conditioning in hot climates. The most common type of heat pump is an air-source heat pump. They are used to transfer thermal energy from the outside air, through a duct system inside your home, and out of vents located in rooms you want to be heated.

Vertical vs Horizontal Heat Pumps

Both models have their pros and cons depending on where you live. If you’re living in an area that gets very cold during the winter (under 20 degrees Fahrenheit), you’ll want to go with a horizontal model. These heat pumps are more efficient at below-freezing temperatures because the fluid inside them is able to circulate throughout the entire system, allowing it to extract thermal energy from everywhere and transfer that into your home’s ducts. Vertical models don’t allow this as efficiently, as the fluid is only able to flow through a few tubes that are attached at one end.

In areas where temperatures never go below freezing, both models work fine and it’s usually based on which brand you want to go with since they all have similar efficiency ratings. That being said, if you live in an area where it snows during the winter, you’ll want to go with a vertical model. These heat pumps are designed and built specifically for colder climates (like northern states), so the tubes that transfer thermal energy inside them will be able to handle the weight of accumulated snowfall without breaking or cracking.

Can I get by with just one?

Many homes only have one heat pump – typically the vertical model. This is usually because they cost less than horizontal models and are easier to install. If you can afford it, however, it’s best to get both types of heat pumps that way you’re able to take advantage of their pros during different times throughout the year (i.e., a vertical model during the winter and a horizontal one during summer/fall).

Pros and cons of installing a new heat pump system

Installing a new heat pump system for your home can be costly, but it’s definitely worth the money if you’re looking to reduce energy bills. The more efficient they are at extracting thermal energy from the outside air and transferring that into rooms inside your house, the lower your monthly heating/cooling bill will be. We always recommend doing some research before buying a new appliance or system for your home to make sure it’s the right one for you.

How much electricity do heat pumps use?

Heat pumps use a lot of electricity, so you’ll definitely want to look at your monthly electric bill before deciding whether or not it’s worth getting one. If you’re living in an area with high electricity costs, they can definitely be worth it because their overall efficiency means that your bill won’t be as high during the winter (or summer).

How long do they last?

Heat pumps can easily last anywhere between 15-20 years if they are well maintained. If you have a warranty, this may even increase to 25 or 30 years depending on the brand/company that is providing it. If you’re living in an area that gets very cold during the winter, we always recommend getting a backup system just in case your heat pump breaks down during the coldest days of winter when you need it most (such as when there’s a polar vortex or another type of winter storm).

Final Words

In conclusion, it’s important to know as much as you can about the different models and types of heat pumps so that you can buy one that will meet your needs – as well as take care of it throughout its lifetime.  Whether you go with a horizontal or vertical model, make sure that it’s the right one for where you live so that you don’t have any issues with it during the winter.

Green Street HVAC can help you out in finding a heat pump that is suitable for your home’s heating needs.